Search results for 'Visit Cheapfifa23coins.com 30%2525 OFF code%253AFIFA2023%257C I will continue to use Cheapfifa23coins.com for their services whe'

The surface mounted, windstorm rated solution

The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.

The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous duty

DOWNLOADS
Data Sheet
Installation Instructions

The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year Warranty

The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.

FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”

**Don't Forget About A Power Supply With Electric Latch Retraction**

DOWNLOADS
MLRK1 Cut Sheet
MLRK1 Installation Manual

Trine 4850 Surface mounted Electric strike for Rim Panic Devices

The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt

FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.

Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC Operation

DOWNLOADS
Data Sheet
Buzzer Size

RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D Only

The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.

FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited Warranty

DOWNLOADS
0161 Cut Sheet
0161 Installation Manual

Used with the SDC 45 Series electric Strikes.

The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

Add sound to your electric strike activation with a plug-in buzzer

Need to know when people are entering?
With the addition of a plug-in buzzer, you'll hear an audible sound every time the strike is energized.
An easy way to add security to your access control system.

Works With either 12vDC or 24vDC systems

DOWNLOADS
Installation Instructions

Trine BZ-12 Audible Buzzer for 12vDC power
Trine BZ-24 Audible Buzzer for 24vDC power

DOWNLOADS
Buzzer Size

RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

NOTE: Available in US32D Only

FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited Warranty

DOWNLOADS
0162 Cut Sheet
0162 Installation Manual

Designed with round corners for aluminum jambs.
Comes packed with all adapters for either 12/16/24 VAC or VDC inputs.

7400 = Flat Face Plate - (Door Jamb Mount / Single Door Application)
7401 = Round Face Plate -(Door Stile Mount / Pair Of Doors Application)

Fail safe or fail secure functions are field selectable.- (Comes packed as fail secure)
Note: Fail safe units should only be operated with DC power.

DOWNLOADS
Data Sheet