Search results for 'elect AND 1%252525252525252525252525252525252525252525252525252525252525252525252525253D1'
-
3792 First Choice Series 3790 Rim Panic Exit Device - Standard & Electric Latch Retraction
$240.00First Choice Series 3792 Rim Panic Exit Device, With Cylinder Prep, Less Key Cylinder
Packaging powerful security into a compact size, the 3792 can be mounted on doors with stiles as narrow as 2” and includes a 1” forged steel latch bolt.
Non-handed and available for doors up to 4 feet, the 3792 is a convenient solution for demanding, busy traffic conditions.
These durable devices are ANSI Grade I (500,000 cycles) and UL Listed.
Striking anodized finishes are accented with high-performance coatings on solid metal end clips.
The 3792, EL3792, MEL3792 can retrofit the old Dor-0-Matic crash bar (part # 2090) and it also can replace the Dor-0-Matic 1790.**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**
DOWNLOADS
3792 Product Literature
3792 Product Manual / Installation
3700 Series Product Template**Aroyan Can Not Warranty an EL/MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**
PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48" MEL Devices - All Finishes
- ALL Solenoid EL Devices are being DISCONTINUED! - If you need a Solenoid EL device we have very limited in stock, please call to verify. Once they are gone, they are gone.Current discontinued 16 amp EL Inventory Includes:
Learn More
- 4 @ EL3792-42" Clear Anodized
- 2 @ EL3792-42" Dk. Bronze Anodized -
1 1/4" Custom Straight Ladder Pulls ARM3301
$90.00ARM3301 - 1 1/4” diameter with custom center to center straight pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer Pulls when not seen.
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please specify
Base: 1"
Projection: 3 1/2"
Clearance: 2 1/4"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3301 Cut Sheet -
3692 First Choice Series 3690 CVR Panic Exit Device - Standard & Electric Latch Retraction
$240.00First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**
DOWNLOADS
3692 Product Literature
3692 Product Manual / Installation
3600 Series Product Template**Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**
PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
Learn More
- 48" BlackStandard/Manual Device
- 48" MEL Devices - All Finishes -
1" Heavy Duty Solid Push Bar
$40.00Our standard A47 Push Bars are made of solid 1" diameter Aluminum.
Each Push Bar has a 1 5/8" clearance on the lock side of the door which slopes down to 3/8" at the hinge side where a plastic transition block creates clearance from the door.
Each Push Bar is fastened with a 5/16-18 cone head bolt for heavy duty long lasting application at the lock side and a 1/4-20 Button Head Cap Screw at the hinge.
36" Aroyan Door on Butt Hinges = 33 11/16" CTC
36" Aroyan Door on Continous Hinges = 33 7/16" CTC
42" Aroyan Door on Butt Hinges = 39 11/16" CTC
42" Aroyan Door on Continous Hinges = 39 7/16" CTC
Note:
P1565E & P1565G = This will be a factory order and will take up to TWO weeks to receive.
P1565E & P1565G will be fastened with 1/4-20 cone head at lock side and 1/4 - 20 at the hinge side.
P1565E : Stock 36" Tubelite Door on Butt Hinges = 33 3/4" CTC
P1565G : Stock 42" Tubelite Door on Butt Hinges = 39 3/4" CTCDOWNLOADS
Learn More
A47 Cut Sheet
ABF15747 Cut Sheet -
1 1/4" Custom Offset Ladder Pulls ARM3311
$90.00ARM3311 - 1 1/4” diameter with custom center to center offset pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer pulls when not seen. .
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any order with a non-centered mid post must be accompanied by the order form sheet available here Order Form
Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please Specify
Base: 1"
Projection: 3 1/8"
Clearance: 2 7/8"
Offset: 1 5/8"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3311 Cut Sheet