Search results for 'elect AND 1%2525252525252525252525252525252525252525252525252525252525253D1'
-
Von Duprin 99EO RIM Exit Device
$1,115.00The Von Duprin 99EO is an exit only rim exit device for all types of single or double doors with mullion.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.The 99 device has a grooved mechanism case.
This Device is a 99EO-3'-US26D -Satin Chrome 3 Foot Device
The rim device is non-handed
Exit Only function
Trim not included
For doors 1-3/4" to 2-1/4" thick
Strike- 299 – Dull Black.
Dogging Feature- Hex key dogging standard.
Latch Bolt-Deadlocking 3/4“ throwDOWNLOADS
Learn More
Data Sheet -
Sneeze Guard / Safety Divider / Partition Posts - Surface Mounted
$50.00These protective posts are designed to create a defensive barrier that allows for interactions while easing the concerns of your employees and customers.
The ideal solution to protect your staff and customers from the rapid spread of airborne bacterial germs and viruses caused by sneezing and coughing.
Used to separate restaurant booths, counters, office desks, banks, retail store cashier sections, or just about anywhere you can think of.
Diameter: 1" dia. tube.
Finish: Brushed (satin) stainless steel - US32D
Height: 30" tall - Can be recut to any length. (Remove bottom mounting foot and cut with pipe cutter, then reattach foot)
Adjustable clamps accept 1/4" or 3/8" Glass, Plexi, Lexan. (Note: Glass, Plexi, Lexan is not included)
Glazing Secured by nylon-tipped set screws.
Claps are adjustable to any angle!
Glass recommendation: We recommend setting your vertical posts in place prior to ordering from your local glass company. This will ensure proper sizing and fit. The glass can extend past the top of the vertical tube to make it taller than 30”. You can also hold the glass up 5” for example or have the glass cut to have a “pass-through” at the bottom. We recommend you get the glass with polished edges. Please consult a glass company for recommended maximum spans depending on glazing selected.Note: fasteners NOT included due to varting surface mounting conditions.
If you need a WALL MOUNTED bracket for these vertical posts please click HERE
Learn More -
Wall Mounted Bracket For Sneeze Guard / Safety Divider / Partition Posts
$20.00Wall mounted bracket for our Sneeze Guard / Safety Divider / Partition Posts. Offset to the centerline of the post is 2 1/2". Mounts to wall with two screws and vertical post is held by six set screws. Bracket dimensions: Overall bracket sticks out: 3 7/16" Width: 1 15/16" Height: 2 3/4"
Note: fasteners NOT included due to varting surface mounting conditions.
NOTE: Posts are NOT included but can be purchased HERE
Learn More -
Schlage 23-030c - LFIC (Large Format IC Cores Temporary Core "One Bitted")
$50.00Large Format Interchangeable Core - Schlage 23-030c
6 Pin Temporary Core. - One Bitted Only
Solid Brass
Come with 1 Control Key and 1 Operating Key.
26D finish OnlyDOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Schlage 20-079 (LFIC Rim For Panic Devices)
$50.00Large Format Interchangeable Rim Cylinder For Panic Devices.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
(With Tailpiece and Stamped 3/32" Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
First Choice SW300-2CA Signal Switch
$175.00The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More -
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
SDC BR64XL Rectifier
$20.00Used with the SDC 45 Series electric Strikes.
The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.
Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load
Learn More -
SDC RMB Buzzer
$35.00Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.
Learn More -
Norton Touchless Actuators 700
$325.00Norton 700 Touchless Actuator Single gang AND double gang packaged together The sensor requires movement for activation Motion Sensor 0"-4" range 0-35 Second Variable Hold Satin Stainless Steel Dimensions: 3" W x 4-3/4" H (Single), 4-1/2" W x 4-1/2" H (Double) Compatible with the following Norton operators: 5600 Series, 5700 Series (5740K3), 5800 Series (ADAEZ), 6000 Series, and 6300 Series Please Note: You Get ONE Switch and two faceplates in the box.
DOWNLOADS
Learn More
INSTALLATION INSTRUCTIONS