Search results for 'elect AND 1%25252525252525252525252525252525252525252525252525252525252525252525253D1'
-
Von Duprin EPT (Electric Power Transfer)
$375.00Von Duprin EPT-2 / EPT-10 Electrical Power Transfer
EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.DOWNLOADS
Learn More
Data Sheet
Installation Instructions -
Von Duprin PS914-2RS Power Supply
$800.00Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.DOWNLOADS
Learn More
PS914 Data Sheet
Installation Instructions -
Schlage AL80BD SAT 626 Storeroom Door Lever Set
Regular Price: $200.00
Special Price $100.00
The Schlage AL80BD Storeroom Lever is perfect for medical, office, hotel, public buildings, religious, multi-family, retail, and government facilities. Both indoor and outdoor applications
AL series has been discontinued and replaced by the ALX
One left - get it on a DISCOUNTED speical price!
Schlage AL80BD SAT 626 Storeroom Door Lever Set without Small Format Interchangeable Core
- Function Entrance
- Grade 2
- Finish: Satin Chrome - 626
- Handing Reversible
- Backset: 2-3/4"
- Latch Type: Square Corner
- Strike: ANSI Strike 10-025
- Door Thickness 1-3/8" to 1-7/8"
- ANSI Certification: Meets or exceeds A156.2 Series 4000, Grade 2 strength and operational requirements.DOWNLOADS
AL-Series Catalog
AL-Service Manual
AL-Installation Instructions
Learn More -
ADA1015P Hardwire Kit - Transformer, Armored Door Cord, 50' of Cable ADAEZ / Noton 5800
$210.00HARDWARE KIT – Enables operator to be used 100% automatically plus may engage Power Close and Push-N-Go Features – includes -Transformer, Armored Door Cord, End Links. Learn More -
P059 Flush Bolt
$15.00Typically mounted along the edge of "inactive" door stiles for pair of doors.
Offset: 1/4" / Offset: 1/8"
Flush Bolt Length: 12"
Rod Length: 11" (1/4"-20 thread rod)
Square nylon tip with Beveled Corners Fits in 1/2" (13 mm) Square or Round Strike
Bolt Throw: 5/8"
Backset: 7/8"
5/8" adjustment on rod length
Face Plate: 15/16" Wide x 4-1/4" High with 5/32" radius corner
1/4" Offset is Standard for Tubelite Doors on the edge of stile - 10-24 thread
1/8" Offset is for the face of the stile - 10-24 thread
Note: Guides NOT included.
Price is for Single Unit, and not a pair.DOWNLOADS
Learn More
Data Sheet -
MS Face Plate
$8.00Fits With MS 1850 Series Locks.. Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only - 7 1/4" x 1 1/8" Comes With Screws. See 2nd Picture For Handing. Learn More -
Latch Lock Face Plate
$8.00Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.
Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only
See 2nd Picture For Handing.
Learn More -
Power Supplies for First Choice MEL & EL Panic Devies
$150.00Not Sure Which Power Supply you need?: Power Supply Selector
1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install ManualFree Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)
Learn More -
First Choice L3 Lever Trim for 3690/3790 Manual Series Exit Devices
$415.00All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.DOWNLOADS
Product Literature
Product Literature
Product Templates"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Learn More -
.040" Aluminum Break Metal Sheets
$110.00Prefinished .040" Aluminum Sheets in Both Anodized and Painted Finishes.
Available In Full 4' x 8', 4' x 10', and 4' x 12' (All Sheets Pickup Only) or cut sizes pieces may be shipped.
please call to order cut size sheets.(Larger sheets are available upon request)
Learn More