Search results for 'Visit Cheapfifa23coins.com 30%2525 OFF code%253AFIFA2023%257C I will be using the site again in the future for sure%252C good jo'
Maximum Search query length is 128. Your query was cut.
Maximum words count is 10. In your search query was cut next part: site again in future for sure%252C good jo.
-
Rockwood 106-RKW Straight Pull 6" CTC
$20.00Rockwood 106-RKW Straight Pull
SPECIFICATIONS
Material Size: 3/4" dia.
CTC: 6"
Overall: 6-3⁄4"
Projection: 2-5/8"
Clearance: 1-7/8"
Mounting: standard duty 1/4-20 Thru-Bolt for Single Pull Application Single or Back to back mounting available.In STOCK in Clear Anodized and Dark Bronze Anodized Only
*US32D Only available by Factory order.
*US32 Only available by Factory order.
*US3 Only available by Factory order.
*US4 Only available by Factory order.DOWNLOADS
Learn More
Data Sheet -
Xcluder Pest Control Door Sweep
$60.00 As low as: $45.00Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size doorCut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installationCurrent discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze Anodized
- 5 @ 48" Dk. Bronze AnodizedDOWNLOADS
Learn More
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions -
Norton Touchless Actuators 700
$325.00Norton 700 Touchless Actuator Single gang AND double gang packaged together The sensor requires movement for activation Motion Sensor 0"-4" range 0-35 Second Variable Hold Satin Stainless Steel Dimensions: 3" W x 4-3/4" H (Single), 4-1/2" W x 4-1/2" H (Double) Compatible with the following Norton operators: 5600 Series, 5700 Series (5740K3), 5800 Series (ADAEZ), 6000 Series, and 6300 Series Please Note: You Get ONE Switch and two faceplates in the box.
DOWNLOADS
Learn More
INSTALLATION INSTRUCTIONS -
Sneeze Guard / Safety Divider / Partition Posts - Surface Mounted
$50.00These protective posts are designed to create a defensive barrier that allows for interactions while easing the concerns of your employees and customers.
The ideal solution to protect your staff and customers from the rapid spread of airborne bacterial germs and viruses caused by sneezing and coughing.
Used to separate restaurant booths, counters, office desks, banks, retail store cashier sections, or just about anywhere you can think of.
Diameter: 1" dia. tube.
Finish: Brushed (satin) stainless steel - US32D
Height: 30" tall - Can be recut to any length. (Remove bottom mounting foot and cut with pipe cutter, then reattach foot)
Adjustable clamps accept 1/4" or 3/8" Glass, Plexi, Lexan. (Note: Glass, Plexi, Lexan is not included)
Glazing Secured by nylon-tipped set screws.
Claps are adjustable to any angle!
Glass recommendation: We recommend setting your vertical posts in place prior to ordering from your local glass company. This will ensure proper sizing and fit. The glass can extend past the top of the vertical tube to make it taller than 30”. You can also hold the glass up 5” for example or have the glass cut to have a “pass-through” at the bottom. We recommend you get the glass with polished edges. Please consult a glass company for recommended maximum spans depending on glazing selected.Note: fasteners NOT included due to varting surface mounting conditions.
If you need a WALL MOUNTED bracket for these vertical posts please click HERE
Learn More -
Wall Mounted Bracket For Sneeze Guard / Safety Divider / Partition Posts
$20.00Wall mounted bracket for our Sneeze Guard / Safety Divider / Partition Posts. Offset to the centerline of the post is 2 1/2". Mounts to wall with two screws and vertical post is held by six set screws. Bracket dimensions: Overall bracket sticks out: 3 7/16" Width: 1 15/16" Height: 2 3/4"
Note: fasteners NOT included due to varting surface mounting conditions.
NOTE: Posts are NOT included but can be purchased HERE
Learn More -
Schlage 23-030c - LFIC (Large Format IC Cores Temporary Core "One Bitted")
$50.00Large Format Interchangeable Core - Schlage 23-030c
6 Pin Temporary Core. - One Bitted Only
Solid Brass
Come with 1 Control Key and 1 Operating Key.
26D finish OnlyDOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Schlage 20-079 (LFIC Rim For Panic Devices)
$50.00Large Format Interchangeable Rim Cylinder For Panic Devices.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
(With Tailpiece and Stamped 3/32" Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Schlage 20-060 (LFIC Mortise For Adams Rite Locks)
$50.00Large Format Interchangeable Mortise Cylinder For Adams Rite Locks.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Schlage 20-059 (LFIC Mortise For CD Kits)
$50.00Large Format Interchangeable Mortise Cylinder For Von Duprin Cylinder Dogging Kits.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
First Choice SW300-2CA Signal Switch
$175.00The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More