Search results for 'Visit Cheapfifa23coins.com 30%2525252525252525 OFF code%252525252525253AFIFA2023%252525252525257C I will be using the site again'
Maximum Search query length is 128. Your query was cut.
Maximum words count is 10. In your search query was cut next part: site again.
-
First Choice SW300-2CA Signal Switch
$175.00The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More -
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
P795 Intermediate Pivot Set For Tubelite Door P795I L/R
$122.00Tubelite Intermediate Pivot Set
Includes Intermediate P795I L/R Frame and Door Portion
Standard 3/16" Inset Mount Specify Left or Right HandDOWNLOADS
Learn More
Brochure -
P795 Bottom Pivot Set For Tubelite Door P795 L/R & P795DB
$42.00Tubelite Bottom Pivot Set
Includes Top P795L/R Frame Portion Top P795DB Door Portion
Standard 3/16" Inset Mount Specify Left or Right HandDOWNLOADS
Learn More
Brochure -
P795 Top Pivot Set For Tubelite Door P795H & P795DT
$27.00Tubelite Top Pivot Set
Includes Top P795H Frame Portion Top P795DT Door Portion
Standard 3/16" Inset MountDOWNLOADS
Learn More
Brochure -
Rockwood 106-RKW Straight Pull 6" CTC
$20.00Rockwood 106-RKW Straight Pull
SPECIFICATIONS
Material Size: 3/4" dia.
CTC: 6"
Overall: 6-3⁄4"
Projection: 2-5/8"
Clearance: 1-7/8"
Mounting: standard duty 1/4-20 Thru-Bolt for Single Pull Application Single or Back to back mounting available.In STOCK in Clear Anodized and Dark Bronze Anodized Only
*US32D Only available by Factory order.
*US32 Only available by Factory order.
*US3 Only available by Factory order.
*US4 Only available by Factory order.DOWNLOADS
Learn More
Data Sheet -
ADA1019-2 Single 4 1/2" Pushbutton Assembly - with RF Transmitter ADAEZ / Norton 5800
$210.00ADAEZ / Norton 5800
4 1/2" Pushbutton Assembly - with RF Transmitter
1019-2 Qty= ONE PushbuttonPlease order ADA1019-2A for Qty of TWO push Buttons
Learn More -
ADA1019-2A Pair of 4 1/2" Pushbutton Assembly - with RF Transmitter ADAEZ / Norton 5800
$355.00ADAEZ / Norton 5800
4 1/2" Pushbutton Assembly - with RF Transmitter
Learn More
1019-2A Qty = TWO Pushbuttons -
ADA1028W WIM Card ADAEZ / NORTON 5800
$305.005800 Series ADAEZ® Operator Wireless Interface Module (WIM)
Norton introduces the Wireless Interface Module, designed to interface all versions of the 5800 Series ADAEZ Low Energy Operator (PRO, PRO PLUS, COMPLETE) with a variety of actuators and systems, including:
Wired or ADAEZ wireless push buttons
ADAEZ wireless remote
Electric lock Fire panel
Access control system
Outside push button disable contactDOWNLOADS
Learn More
WIM Card -
1 1/4" Custom Offset Ladder Pulls ARM3311
$90.00ARM3311 - 1 1/4” diameter with custom center to center offset pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer pulls when not seen. .
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any order with a non-centered mid post must be accompanied by the order form sheet available here Order Form
Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please Specify
Base: 1"
Projection: 3 1/8"
Clearance: 2 7/8"
Offset: 1 5/8"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3311 Cut Sheet