Search results for 'Visit Cheapfifa23coins.com 30%2525252525 OFF code%252525253AFIFA2023%252525257C I will be using the site again in the future for'
Maximum Search query length is 128. Your query was cut.
Maximum words count is 10. In your search query was cut next part: site again in future for.
-
BEA 10TD900PB 900 MHz Transmitter
$50.00BEA / BEA Transmitters and Receivers Sensors, Switches, Relays, Timers / Transmitters, Receivers & Kits BEA 10TD900PB Hardwired Transmitter, 900 MHz, Flagged, for use with All Activation Plates, (2) AAA batteriesDOWNLOADS
Cut Sheet Learn More -
BEA 10BR2-900 Logic Module
$139.00BEA / BEA Logic Modules Sensors, Switches, Relays, Timers / Software & Control Hardware BEA 10BR2-900 Logic Module, Sequenced or Simultaneous Relay Activation, 2 RelaysDOWNLOADS
Cut Sheet Learn More -
Door Astragal Pile / Felt
$2.00Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors
P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard
P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard
P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Door Stop Pile / Felt P1098A
$1.00Wool Pile For DoorStops On Tubelite / Aroyan Doors
P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Dormakaba RCI 0161 Electric Strike
$190.00RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D OnlyThe stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.
FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0161 Cut Sheet
0161 Installation Manual -
Dormakaba RCI 0162 Electric Strike
$310.00RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.NOTE: Available in US32D Only
FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0162 Cut Sheet
0162 Installation Manual -
Command Access MLRK1-FAL17 (MLRK1-FC17) Motorized Latch Retraction Kit for First Choice 3600/3700 Series Exit Device MEL / QEL
$350.00The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year WarrantyThe MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”**Don't Forget About A Power Supply With Electric Latch Retraction**
DOWNLOADS
Learn More
MLRK1 Cut Sheet
MLRK1 Installation Manual -
Power Supplies for Command Access MLRK1-FAL17 MEL Kit
$140.00Command Access PS202 Power Supply. This Will Power TWO (2) MLRK1 MEL Kit.
PS202 - 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.
DOWNLOADS
Learn More
PS202 Cut Sheet
PS202 Installation Manual -
First Choice QC-CAB-002 Quick Connect Cables
Regular Price: $100.00
Special Price $35.00
22/12 Frame to Ceiling Connecting Cable for Motor Electric Latch Retraction 180" Length (2-8 Pin Female, 2-4 Pin Male)DOWNLOADS
Learn More
Cut Sheet -
Record SimpleSwing SS 8200 HD Automatic Door Opener
$2,000.00The Record SimpleSwing (SS8200) low energy door operators are heavy duty (HD) for reliable operation like you have never experienced. Designed to handle a maximum door weight of 700lbs -- the SS8200 has been engineered to accommodate most types of inswinging and outswinging doors.
DOWNLOADS
Sell Sheet
Drawing
WarrantyWith built-in programmable controls and interfaces for electric strikes—combined with up to a 3-year warranty—the SS8200 simply out performs the competition.
-All units are stocked as: 36" w/ Standard Arms & 35mm Spinals (Overall header width 39.5" long)
-Track Arms can be purchased separately
-For 42", 48", Or Pairs - Please call to order. - (w/ added price & lead time)
-Black Finish is available as a factory order - (w/ added price & lead time)Features
-Can be used for interior or exterior applications
-Surface Mounted
-Push or Pull Same Unit -Non-handed*
-SimpleLynk communications display allows the installer to properly set-up and program the door
-Simple to install and program
-Available for singles stocked and for pairs or double egress doors are factory order
-Available in clear or dark bronze anodized finishes
-Push to start applications eliminate the need for additional activation accessories and complex wiring
-Latch assist function assures closing in areas with heavy stack conditions
-Interfaces with electric strikes without additional relays or delays
-Breakaway adapter to prevent operator or arm damage when abused
-Various arm options
* Handing can be changed in the field from selected handing when ordered.Complies with the following standards. ANSI/BHMA A156.19, UL325, UL228, UL10C.
NOTE: The base unit does NOT come with activation push buttons. (Below kits can be ordered for ease, or individual items can be purchased for a custom configuration)
Activation Push Buttons Kit Details:
No KIt: No Push Buttons, No Mounting Boxes
Kit 1: Includes 2 @ 4.5" Square BEA 10PBS451 buttons & 2 @ BEA 10BOX45SQSM Surface Mounted Boxes
Kit 2: Includes 2 @ 4.5" Square BEA 10PBS451 buttons, 2 @ BEA 10BOX45SQSM Surface Mounted Boxes, 2 @ BEA 10TD900PB 900MHz Transmitters & 1 @ BEA 10BR2-900 2-Relay Logic Module
Kit 3: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttons & 2 @ BEA 10BOXJAMBSM Jamb Surface Mounted Boxes
Kit 4: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttons, 2 @ BEA 10BOXJAMBSM Jamb Surface Mounted Boxes, 2 @ BEA 10TD900PB 900MHz Transmitters & 1 @ BEA 10BR2-900 2-Relay Logic ModuleDOWNLOADS
Sell Sheet
Drawing
Warranty
Learn More