Search results for 'Visit Cheapfifa23coins.com 30%25252525252525252525 OFF code%2525252525252525253AFIFA2023%2525252525252525257C I will be using th'
Maximum Search query length is 128. Your query was cut.
-
BEA 10TD900PB 900 MHz Transmitter
$50.00BEA / BEA Transmitters and Receivers Sensors, Switches, Relays, Timers / Transmitters, Receivers & Kits BEA 10TD900PB Hardwired Transmitter, 900 MHz, Flagged, for use with All Activation Plates, (2) AAA batteriesDOWNLOADS
Cut Sheet Learn More -
BEA 10BR2-900 Logic Module
$139.00BEA / BEA Logic Modules Sensors, Switches, Relays, Timers / Software & Control Hardware BEA 10BR2-900 Logic Module, Sequenced or Simultaneous Relay Activation, 2 RelaysDOWNLOADS
Cut Sheet Learn More -
Door Astragal Pile / Felt
$2.00Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors
P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard
P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard
P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Door Stop Pile / Felt P1098A
$1.00Wool Pile For DoorStops On Tubelite / Aroyan Doors
P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Dormakaba RCI 0161 Electric Strike
$190.00RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D OnlyThe stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.
FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0161 Cut Sheet
0161 Installation Manual -
Dormakaba RCI 0162 Electric Strike
$310.00RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.NOTE: Available in US32D Only
FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0162 Cut Sheet
0162 Installation Manual -
Command Access MLRK1-FAL17 (MLRK1-FC17) Motorized Latch Retraction Kit for First Choice 3600/3700 Series Exit Device MEL / QEL
$350.00The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year WarrantyThe MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”**Don't Forget About A Power Supply With Electric Latch Retraction**
DOWNLOADS
Learn More
MLRK1 Cut Sheet
MLRK1 Installation Manual -
Power Supplies for Command Access MLRK1-FAL17 MEL Kit
$140.00Command Access PS202 Power Supply. This Will Power TWO (2) MLRK1 MEL Kit.
PS202 - 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.
DOWNLOADS
Learn More
PS202 Cut Sheet
PS202 Installation Manual -
First Choice QC-CAB-002 Quick Connect Cables
Regular Price: $100.00
Special Price $35.00
22/12 Frame to Ceiling Connecting Cable for Motor Electric Latch Retraction 180" Length (2-8 Pin Female, 2-4 Pin Male)DOWNLOADS
Learn More
Cut Sheet -
Record SimpleSwing SS 8200 HD Automatic Door Opener
$2,000.00The Record SimpleSwing (SS8200) low energy door operators are heavy duty (HD) for reliable operation like you have never experienced. Designed to handle a maximum door weight of 700lbs -- the SS8200 has been engineered to accommodate most types of inswinging and outswinging doors.
DOWNLOADS
Sell Sheet
Drawing
WarrantyWith built-in programmable controls and interfaces for electric strikes—combined with up to a 3-year warranty—the SS8200 simply out performs the competition.
-All units are stocked as: 36" w/ Standard Arms & 35mm Spinals (Overall header width 39.5" long)
-Track Arms can be purchased separately
-For 42", 48", Or Pairs - Please call to order. - (w/ added price & lead time)
-Black Finish is available as a factory order - (w/ added price & lead time)Features
-Can be used for interior or exterior applications
-Surface Mounted
-Push or Pull Same Unit -Non-handed*
-SimpleLynk communications display allows the installer to properly set-up and program the door
-Simple to install and program
-Available for singles stocked and for pairs or double egress doors are factory order
-Available in clear or dark bronze anodized finishes
-Push to start applications eliminate the need for additional activation accessories and complex wiring
-Latch assist function assures closing in areas with heavy stack conditions
-Interfaces with electric strikes without additional relays or delays
-Breakaway adapter to prevent operator or arm damage when abused
-Various arm options
* Handing can be changed in the field from selected handing when ordered.Complies with the following standards. ANSI/BHMA A156.19, UL325, UL228, UL10C.
NOTE: The base unit does NOT come with activation push buttons. (Below kits can be ordered for ease, or individual items can be purchased for a custom configuration)
Activation Push Buttons Kit Details:
No KIt: No Push Buttons, No Mounting Boxes
Kit 1: Includes 2 @ 4.5" Square BEA 10PBS451 buttons & 2 @ BEA 10BOX45SQSM Surface Mounted Boxes
Kit 2: Includes 2 @ 4.5" Square BEA 10PBS451 buttons, 2 @ BEA 10BOX45SQSM Surface Mounted Boxes, 2 @ BEA 10TD900PB 900MHz Transmitters & 1 @ BEA 10BR2-900 2-Relay Logic Module
Kit 3: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttons & 2 @ BEA 10BOXJAMBSM Jamb Surface Mounted Boxes
Kit 4: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttons, 2 @ BEA 10BOXJAMBSM Jamb Surface Mounted Boxes, 2 @ BEA 10TD900PB 900MHz Transmitters & 1 @ BEA 10BR2-900 2-Relay Logic ModuleDOWNLOADS
Sell Sheet
Drawing
Warranty
Learn More